Hot Topics
News
Compliance
Regulations
Ask the Experts
Directories
Resources
About
Search
Home

Pollution Prevention and Control Technologies for Plating Operations


A Project Sponsored by the National Center for Manufacturing Sciences and Conducted in Cooperation with the National Association of Metal Finishers


Library of Congress Cataloging-in-Publication Data
Cushnie, George C., Jr
Pollution Prevention and Control Technology for Plating Operations.
Includes bibliographical references.
1. Electroplating - Metal recovery.
2. Waste minimization - Handbooks, manuals, etc.
94-070208
CIP
Copyright © 1994 by the National Center for Manufacturing Sciences.
All rights reserved.


Disclaimer

This book was prepared by CAI Engineering as contractor to the National Center for Manufacturing Sciences, Inc. (NCMS). It is protected both under the U.S. Copyright Act and applicable state trade secret laws and may not be reproduced or disseminated without the express written permission of the NCMS. (NCMS members may reproduce and disseminate in accordance with their membership contracts with the NCMS and the NCMS bylaws and policies and procedures.) Neither NCMS, members of NCMS, nor any person or entity acting on behalf of them:

Makes any warranty or representation with respect to the accuracy, completeness, or usefulness of the information contained in this report.

Makes any warranty or representation that the use of information, apparatus, method, or process disclosed in this report will not infringe any proprietary rights of a third party.

Makes any warranty or representation that the information contained in this report is statistically reliable or has been prepared based on generally accepted analytical data collection procedures or has been verified in any manner.

Assumes any liability with respect to the use of, or for damages resulting from the use of, any information, apparatus, methods, or process disclosed in this report.

The information and any express or implied opinions in this book do not represent the opinions or views of the NCMS, members of NCMS, or any person or company acting on behalf of the NCMS. This book is intended only to be a factual report of responses submitted by a cross section of manufacturers and vendors in the electroplating industry. Reliance on the information contained herein is at the user's own risk.

Neither the NCMS, its members, or any person or entity acting on behalf of the NCMS makes any warranties whatsoever as to the contents hereof, and all warranties of merchant ability and fitness for purpose are hereby disclaimed.

National Center for Manufacturing Sciences

3025 Boardwalk Drive

Ann Arbor, MI 48108-3266


Back to Main Table of Contents