Air | Solid/Hazardous Waste | Water/Wastewater
Health & Safety | Chemicals/Toxics | Other
Chromium Electroplating Compliance Calendar. Prepared by the Florida Small Business Assistance Program.
National Emission Standard for Hazardous Air Pollutants for Chromium Emissions from Hard and Decorative Chromium. The Chrome NESHAP affects all facilities that use chromium electroplating tanks, regardless of size. Activities your facility must do to comply with the Chrome NESHAP are dependent upon the size of the operation and the type of process (hard, decorative, or anodizing). Also, see 2012 updates.
Metal Fabrication and Finishing Area Source Rule (40 CFR part 63, subpart XXXXXX). This rule covers dry abrasive blasting, dry grinding and dry polishing with machines, dry machining, spray painting, and welding for specific industry categories. The compliance date for existing facilities is July 25, 2011.
NESHAP Halogenated Solvent Cleaning—May 2007 Revisions. On May 3, 2007, EPA published the first significant change in these rules since the National Emission Standard for Hazardous Air Pollutants (NESHAP) for solvent cleaning operations was published in 1994.
NMFRC Plain Guide to the Regulations -- Air Emissions. The NMFRC plain language guide.
Final National Emission Standards for Hazardous Air Pollutants (NESHAP) for Plating and Polishing Operations (NMFRC Fact Sheet)
Applicability Determination Index. A web-based database that contains memoranda issued by EPA on applicability and compliance issues associated with air pollution regulations (e.g., Maximum Achievable Control Technology).
List of Clean Air Act Small Business Ombudsmen and Technical Assistance Directors—Includes names and telephone numbers.
Air Pollution State Resource Locator. Find state and regional air regulatory agencies and rules.
California Inspector's Manual for Plating Operations. Find out what the inspector will be looking for before he shows up at your door.
NMFRC Plain Language Guides to Regulations – Hazardous Waste Management. The NMFRC plain language guide.
EPA Finalizes Amendment to the F019 Hazardous Waste Listing.
EPA Regulatory Determinations—Recent and historical listing of over 100 metal-finishing-specific EPA determinations and over 2,000 RCRA determinations. The determinations can now be searched with a convenient keyword search engine.
RCRA/Hazardous Waste Resource Locator. The rules for managing hazardous waste can vary from state to state. Find your state's regulations, along with permit forms, guidance, contact information and other helpful resources.
Universal Waste Resource Locator. Some common items (batteries, pesticides, etc.) may be exempt from hazardous waste rules. Find out which items are designated as Universal Wastes in your state, link to state regulations, and local contacts at state agencies.
TSD & Recycling Facilities Locator. Use this on-line directory for locating hazardous waste treatment, storage, and disposal (TSD) and recycling facilities.
Electronic Waste Resource Locator. The electronics waste resource locator contains links to regulatory agencies and rules covering electronic waste topics.
Spill Prevention, Control, and Countermeasure (SPCC) - Metal Finishing facilities are subject to the SPCC rule if they have aboveground oil storage capacity greater than 1,320 U.S. gallons, or completely buried oil storage capacity greater than 42,000 U.S. gallons.
NMFRC Plain Language Guides to Regulations – Wastewater Discharges. The NMFRC plain language guide.
Stormwater Rules. A guide for metal finishers for meeting Phase II stormwater regulations.
Industrial Storm Water Resource Locator. Find stormwater permit forms and guidance documents for industrial facilities, and persons you can contact in your state agency for additional assistance.
Storm Water Training Resource Locator. Do you need to find information on Storm Water Training? Find storm water training resources available in your state with this tool.
Total Maximum Daily Load Resource Locator. Some streams and lakes are covered by Total Maximum Daily Load rules for sediment control. Find out about the TMDL program in your state, and determine whether your facility will be affected by TMDL rules.
Health and Safety
NIOSH Issues Chromium Assessment and New Limit
On January 24, 2013, the National Institute for Occupational Safety and Health (NIOSH) posted a document entitled Criteria for a Recommended Standard: Occupational Exposure to Hexavalent Chromium in which NIOSH reviews the critical health effects studies of hexavalent chromium compounds to update its assessment of the potential health effects of occupational exposure to hexavalent chromium compounds and its recommendations to prevent and control these workplace exposures. The document provides a new Recommended Exposure Limit (REL) of 0.20 ug/m3 for workplaces. The criteria document is available here.
OSHA Hexavalent Chromium PEL is Finalized. Find out the details at the NMFRC Cr PEL page.
Occupational Safety & Health Resource Locator. Find out how health and safety laws are implemented in your state, link to the standards, and learn about available programs that assist with compliance.
TRI Reporting. An explanation of the TRI responsibilities for the metal finisher.
Lead and TRI Reporting. A guidance document for determining the applicability of TRI reporting and links to reporting resources.
Chemical Facility Anti-Terrorism Standards. Do these standards apply to your plating shop? Find out here.
REACH — Registration, Evaluation, Authorisation and Restriction of Chemical substances is a European Community Regulation (EC 1907/2006) that became effective on June 1, 2007. It replaces a number of fragmented European directives and regulations within a single system.
On-line Inspection Survival Course for Metal Finishers. An on-line course developed by NMFRC.
NMFRC Audit Policy Page. NMFRC has prepared a resource which examines EPA's Self-Audit Policy. It also details the relationship of Federal and state rules and links to additional information from around the Web.
EPA Region and State Pollution Prevention (P2) contacts.