Presented in Partnership with:

SEP 24 1984


SUBJECT: Zinc Plating (segregated basis) on Carbon Steel

FROM: Matthew A. Straus, Chief

Waste Identification Branch, (WH-562B

TO: Michael Sanderson, Chief

Air and Hazardous Waste Compliance Branch

Air and Hazardous Materials Division

EPA Region VII

This is written in response to your September 18, 1984 request for clarification regarding zinc plating (segregated basis) on carbon steel.

With respect to electroplating operations, wastewater treatment sludges generated from zinc plating on carbon steel are considered non-hazardous only when the waste stream from this operation is maintained and treated separately (segregated) from other hazardous waste streams generated at a facility. In many cases, however, zinc plating is often followed by chemical conversion coating, which includes coloring, chromating, and immersion coating, as well as other plating operations. Chemical conversion coating is defined in EPAs listing background document as a component of electroplating and therefore, the wastewater treatment sludges generated from this operation would be considered hazardous. If the wastewater from a zinc plating line is combined with wastewaters from other electroplating operations, the resultant wastewater treatment sludge would be considered hazardous.

Therefore, wastewater treatment sludges generated from zinc plating operations, where the zinc waste stream is combined with other hazardous waste streams, are considered EPA Hazardous Waste No. F006 and subject to regulation under 40 CFR 262-266. If you have any further questions on this matter, please do not hesitate to contact Mr. William Sproat of my staff at FTS 382-4783.


| Home | Subscribe | Regulations | Compliance Assistance | News | Resources | Resource Locators | Directories | Online Training | About | Search | |

The information contained in this site is provided for your review and convenience. It is not intended to provide legal advice with respect to any federal, state, or local regulation.
You should consult with legal counsel and appropriate authorities before interpreting any regulations or undertaking any specific course of action.

Please note that many of the regulatory discussions on STERC refer to federal regulations. In many cases, states or local governments have promulgated relevant rules and standards
that are different and/or more stringent than the federal regulations. Therefore, to assure full compliance, you should investigate and comply with all applicable federal, state and local regulations.