NCMSCompliance Assistance Centers

Funded by EPA
through a Cooperative Agreement


The information contained in this site is provided for your review and convenience. It is not intended to provide legal advice with respect to any federal, state, or local regulation. You should consult with legal counsel and appropriate authorities before interpreting any regulations or undertaking any specific course of action.

Additional Resources

Applicability Determination Index. A web-based database that contains memoranda issued by EPA on applicability and compliance issues associated with air pollution regulations (e.g., Maximum Achievable Control Technology).

You can access the CAA regulations through the Electronic Code of Federal Regulations ("e-CFR") provided by the Government Printing Office. CAA Regulations can be found in 40 CFR Parts 50-99.

Alternatives in Air Emission Modeling for Characterization of Processes & Process Change. This paper will examine the strengths and weaknesses of various modeling techniques used for estimating process emissions. Building on this information, a framework will be developed to assist in predicting process emissions that does not rely on empirical data and would therefore be of use in process design.

AP 42 Compilation of Air Pollutant Emission Factors, Chapter 12.20 Metallurgical Industry-Electroplating (July 1996). Was first published by the U.S. Public Health Service in 1968. In 1972, it was revised and issued as the second edition by the U.S. Environmental Protection Agency (EPA). In 1985, the subsequent fourth edition was split into two volumes.

Estimating Emission from Hard and Decorative Chrome Plating (California Permit Handbook).

| Compliance Assistance | Regulations | Directories | Resources | Hot Topics | News | Ask the Experts | Library | Online Training | About NMFRC | Search | Home |