Electric Immersion Heater Sizing Calculator

 

Select Tank Shape:
Enter Tank Diameter (if cylindrical otherwise leave blank)
Enter Tank Width:
Enter Tank Length:
Enter Fluid Depth:
Enter Ambient Temperature (F):
Enter Operating Temperature (F):
Enter Max. Heat-up Time (hrs):
Enter Process Fluid Specific Gravity:
Enter Process Fluid Specific Heat:
Are the Tank Walls Insulated:
Select Tank Surface Insulation:
Is the Tank Ventilated:
Enter Weight (lbs) of Racks/Parts per Hour Entering Tank:
Enter Gallons of Drag-in/Fluid Add per Hour:

 

 


The information contained in this site is provided for your review and convenience. It is not intended to provide legal advice with respect to any federal, state, or local regulation.
You should consult with legal counsel and appropriate authorities before interpreting any regulations or undertaking any specific course of action.

Please note that many of the regulatory discussions on STERC refer to federal regulations. In many cases, states or local governments have promulgated relevant rules and standards
that are different and/or more stringent than the federal regulations. Therefore, to assure full compliance, you should investigate and comply with all applicable federal, state and local regulations.