Presented in Partnership with:
 
 

Technical Articles

Technical articles written by NASF member companies are accessible from this page. This is an opportunity for member companies to showcase their technical expertise. The articles will focus on technical, scientific, regulatory, and practical issues for the finishing industry. Example topics include new chemistries, processes or equipment; regulatory compliance (e.g., pollution prevention, wastewater treatment, OSHA); sustainability; and maintenance/best practices to promote efficiencies.

For more information or to submit an article, contact: Annika Mikkelsen (amikkelsen@nasf.org).

January 2018

Tri-Chrome in Hard Chrome. Adam Blakeley, MacDermid Enthone.

February 2018

The Technical History of the Metal Finishing Rectifier. George Viola BSEE from American Plating Power

March 2018

Nickel Anode Forms and Their Use. Jeff Brassard, GM Palm Commodities International, LLC.

April 2018

Preventing Tank Catastrophes. Curtis Goad, Goad Company

May 2018

Maximizing the Capacity of Existing Finishing Lines. Mark E. Norton CEF, CAF, PriceWalgren a division of George Koch Sons. A Production Capacity Tool is a downloadable file associated with this article.

Adhesion. Matt Schario, Director of Technical Services, Columbia Chemical

June 2018

The Impact of Rectification from a Metal Finisher’s Perspective. Fredrik Walldal, Managing Director of KraftPowercon, Inc & Felipe Atti Dos Santos, Industrial Manager of Cromofix Cromo Duro Ltda.

Passivation of Zinc-Nickel Surfaces: An optimal process control is essential to achieve a high corrosion protection and decorative appearance. Peter Hülser, Sabine Sengl, Atotech Deutschland GmbH

July 2018

High Current Density Barrel Zinc Electroplating: Staying Competitive in a Global Market. Matt Stauffer, PAVCO, Inc., Charlotte, North Carolina

August 2018

Stop Kicking the Can Down the Road. Rich Held, MSF, Laboratory Manager, Haviland Enterprises, Inc., Grand Rapids, Michigan

September 2018

Pumped Eductor Agitation. Melissa Mitchell, SERFILCO

Designing Process Lines to Minimize Energy Costs and Risk. Kyle Hankinson, KCH Engineered Systems

October 2018

Best Practices & Energy Efficiency in Surface Finishing. Peter Gallerani & Nic Gallerani – Integrated Technologies, Inc.

November 2018

Reduced Ion Electroless Nickel to Meet a Sustainable Future. Ambrose Schaffer, CEF, Coventya, Inc., Rome, New York, USA

Phosphorus Copper Anodes for Acid Copper Plating. Andre Depew. Andre has many years of experience in metal finishing, machining, and heat treating. Andre has successfully serviced customers throughout the Midwest and Southeast for Enthone, KKSP Precision Machining, Heatbath, and DuBois Chemicals. Today, Andre is the Eastern Regional Sales Representative for Univertical LLC.

 

 

 

 

 

| Home | Subscribe | Regulations | Compliance Assistance | News | Resources | Resource Locators | Directories | Online Training | About | Search | NASF.org |


The information contained in this site is provided for your review and convenience. It is not intended to provide legal advice with respect to any federal, state, or local regulation.
You should consult with legal counsel and appropriate authorities before interpreting any regulations or undertaking any specific course of action.

Please note that many of the regulatory discussions on STERC refer to federal regulations. In many cases, states or local governments have promulgated relevant rules and standards
that are different and/or more stringent than the federal regulations. Therefore, to assure full compliance, you should investigate and comply with all applicable federal, state and local regulations.